1. Type and temperature of the fluid (please select the body material suitable for the type and temperature of the fluid and the quick connection of sealing material)

According to the fluid, the suitable body material, sealing material is different. For example, the quick connector is air. Steel is recommended, while brass or stainless steel is preferred for water.

2. Liquid pressure of the quick connector (please select the quick connector with pressure resistance suitable for the fluid pressure)

Fluid pressure is also a key factor in the selection of quick connections. The quick joints used for oil pressure are serialized from 5.0mpa (51kgf/cm) to 68.6mpa (700kgf/cm), and the structure of the quick joints is different according to the pressure resistance characteristics.

3. Quick connection for the construction of automatic switching valve (please select the quick connection for the valve construction suitable for piping purpose)

For the construction of the valve, there are two - way switch type, one - way switch type and two - way open type. Due to the separation of the two - way switch type, there is fluid flow out of the pipe. So pay attention.

4. Use environment of the quick connector (please select the structure and material suitable for the environment)

Considering the type, material and sealing material of the selected quick joint, the dust condition, and the easy corrosion, etc.

5. Confirm that the selected quick connection thread should be consistent

In the process of using products of different brands, it is better to use the Yin head and Yang head of the same brand together. If cross use is necessary, it is better to consult the technical personnel of the product supplier before use and use them after /confirm/iation.

6. Shape and size of installation (please order the product after confirming the final shape and size of the quick connector)

Determine the type and material of the quick connection and specify the assembly shape and size corresponding to the piping characteristics. Note that size is related to flow rate